工作服定做  工厂工作服款式  现货工作服  广告衫定做 t恤批发 男士西服
赢信工作服定做
您现在的位置:首页 > 服装常识

    问:面料检验的目的和要求是什么?


    发布时间:2014-09-09 15:43:00 点击:

    答:把好面料质量关是控制成品质量重要的一环。通过对进厂面料的检验和测定可有效地提高服装的正品率。

    面料检验包括外观质量和内在质量两大方面。外观上主要检验面料是否存在破损、污迹、织造疵点、色差等等问题。经砂洗的面料还应注意是否存在砂道、死褶印、披裂等砂洗疵点。影响外观的疵点在检验中均需用标记注出,在剪裁时避开使用。

    面料的内在质量主要包括缩水率、色牢度和克重(姆米、盎司)三项内容。在进行检验取样时,应剪取不同生产厂家生产的、不同品种、不同颜色具有代表性的样品进行测试,以确保数据的准确度。

    同时对进厂的辅料也要进行检验,例如松紧带缩水率,粘合衬粘合牢度,拉链顺滑程度等等,对不能符合要求的辅料不予投产使用。

    A: The good fabric quality control of product quality is an important part. By testing and measuring of fabric into the plant can effectively improve the rate of quality clothing.

    Fabric quality inspection including appearance and internal quality two aspects. The appearance of the main test whether there is damage to the fabric, stains, weaving defects, color and so on. By sand fabrics should pay attention to whether the presence of sand road, dead fold and India, Phi bifida sand defects. Affect the appearance of defects in the inspection required by mark note out, avoiding use when tailoring.

    Intrinsic quality fabrics including shrinkage, color fastness and weight (Mumi, ounces) of three elements. When carrying out inspection and sampling, should clipping different manufacturers and different varieties, different colors representative samples for testing to ensure the accuracy of the data.

    At the same time into the plant materials should be tested, such as elastic band shrinkage, Fusible bonding fastness, zipper smooth degree, etc., that can not meet the requirements of the materials are not put into use.

帮助中心
关于赢信
联系我们
网站地图
商务中心
工作服定做
工作服图片
车间工作服
特色产品
t恤衫
polo衫
广告衫
关注我们
新浪博客
官方微信(手机扫一扫)
合作伙伴
合作伙伴

CopyRight  2011  yingxin-sh.com.   All   Rights Reserverd .  卢ICP备0201309号
服务时间 :  周一至周日 8:00-20:00    全国订购及服务热线: 400-630-9300
联系地址:上海市松江区洞泾镇长兴路98弄19     邮编号码: 201600 网站地图